9636 85th Ave N.
Maple Grove, MN 55369
P: 763-424-3736
F:763-424-5272		 Showroom Hours:
Mon – Thurs: 9-7
Friday: 9-5
Saturday: 11-5		 Home | About Us | New Items | Contact Us | Directions
Free Estimate

BUILDERS * REMODELERS * HOMEOWNERS * COMMERCIAL * DIY
 

Vinyl/Linoleum - Care and Maintenance

RESILIENT AND SHEET VINYL FLOORS

1.        In all installations of tile and sheet vinyl floors where the edges meet you can and will see the seams/joints. This is not a defect in the flooring but a limitation of the product.

2.        Shrinkage gaps shall not exceed 1/16” in width. Where dissimilar flooring materials abut, gap shall not exceed 1/8”

3.        Ridges or depressions, cause by expansion or contraction of any sub-floor, shall not exceed 1/8”

4.        Certain embossed patterns of resilient and sheet vinyl floors catch shadows from highs and lows manufactured into the pattern. This creates the illusion of waves in the floor when viewed against a windowed background. The appearance is altered in an occupied home with drapes that create shadows.

5.        Shade and color will vary within each production run of a manufactured tile and may vary also as a result of use, care, cleaning, and age. As a result of any replaced or repaired resilient or sheet vinyl floors, Grand Design Interiors will not be responsible for any shade, texture/color mismatch, discontinued colors or patterns.

6.        Samples displayed are representative of a style of resilient and sheet vinyl floors. Color, shade and texture of resilient and sheet vinyl floors installed may vary from the sample.

7.        Asphalt compounds tracked in from driveways can permanently stain vinyl floors. This condition will turn the vinyl yellow PERMANENTLY, and Grand Design Interiors will not be responsible.

8.        Pigments used in the manufacturing of resilient and sheet vinyl floors are made as fade resistant as possible. Strong sunlight will have a bleaching effect on the flooring materials. Grand Design Interiors shall not be responsible for this bleaching effect.

9.        Stiletto, spike heels, treaded soled shoes that hold pebbles and grit as well as certain types of furniture will damage resilient flooring. Do not use rubber-backed rugs. The rubber backing reacts with the vinyl floor

RESILIENT AND SHEET VINYL FLOORS

·         General maintenance guidelines (refer to manufacturer recommendations):

Proper care and protection will keep your resilient and sheet vinyl floor looking and performing its best. Just how much attention it needs will depend on the type of floor you buy and on how much daily traffic it receives. 

Keeping you floor clean and presentable involves three basic phases of care: Preventative Care- to avoid dirt buildup and wear; damp mopping- for general routine care, and washing-to be sure the floor is really clean, Standard floors also require periodic Polishing and Stripping. Some products may build up and cause damage to the floor. It is recommended to use a cleaner recommended by the manufacturer. (Ex. Armstrong for Armstrong floors.)

 

·         Preventive Care:

Only a few minutes of daily care can go a long way toward helping your floor stay looking its best. Here are a few tips to help you decide what to do and when.              

1.        When moving heavy furniture or appliances, use plywood or hardboard panels, and walk the furniture or appliances across the panel; or slip a scrap of carpet or rug face down under each leg, and slide furniture carefully to avoid scratching or gouging.

2.        Avoid rubber or latex backed rugs that will permanently yellow your vinyl floor.

3.        Sweep, dust mop, or vacuum your floor daily to remove loose dirt before it can scratch your floors surface.

4.        Wipe up wet spills as soon as possible before they dry. Remove dried spills with a damp mop or cloth.

5.        Use floor protectors on legs of furniture to minimize scratches and indentations. Caution: Roller-type casters on furniture may damage resilient/sheet vinyl flooring and any warranty to their suitability rests with the caster/furniture manufacturer. Be certain that caster wheels or slides have a flat surface in contact with the floor. If they do not, we recommend that you change them, keep casters and floor protectors clean and in good working order to help prevent marring and excessive wear of the flooring surface.

 

·         Stain Prevention/Removal:

Most substances that are likely to come in contact with any currently manufactured resilient and sheet vinyl floors will not leave a stain. Spilled liquids do not readily soak into the floors. However, special care should be taken to avoid spills and when they do occur, to remove them as soon as possible since certain substances such as mustard and iodine will stain resilient/sheet vinyl flooring.

 

RECOMMENDED CLEANING PROCEDURE

STAINING SUBSTANCE                                                             REMOVAL PROCEDURE

   Writing Ink                                                                                 1,2,3,4,7

   Lipstick                                                                                        1,2,3,4,7

   Paint  (oil base)                                                                          1,2,3,7

   Varnish

   Nail Polish                                                                                   1,2,5,7

   Tar, Asphalt                                                                                1,2,3,7

   Rust                                                                                              2,6,7,8

   Burns                                                                                             8

 

·         The numbers in this column refer to the removal in this column refer to the removal instructions. Be sure to follow each step in sequence

Instructions

1.        Take up freshly spilled materials with a clean white cloth, using a pickup motion toward the center of the spill to avoid spreading. If the spill has dried, remove excess with a plastic spatula or other tool that will not scratch the floor.

2.        Wet a clean white cloth with detergent floor cleaner, and wipe over the stained area. For heavy residue, use the nylon pad (recommended for nonstick pans) dipped in the detergent. If a stain still shows, proceed to the next instruction indicated.

3.        Wet a clean white cloth with lighter fluid or turpentine** and wipe over the stained area, turning the cloth frequently. Don’t walk on the treated area for 30 minutes.

4.        Wet a clean white cloth with rubbing alcohol** and wipe over the stained area, turning the cloth frequently. Don’t walk on the treated area for 30 minutes. If a stain still shows, repeat the procedure, using liquid chlorine bleach.

5.        Wet a clean white cloth with nail polish remover**, and wipe over the stained area, turning the cloth frequently. Don’t walk on the treated area for 30 minutes.

6.        Apply a good heavy duty cleaner and a good wax remover to the area, and allow to stand for 5 to 10 minutes, then scrub vigorously with a stiff-bristle brush, wipe up and dry. If traces of rust still remain, they may be removed by rubbing with a nylon pad dipped in a solution of oxalic acid diluted in water (10 parts water to 1 part oxalic acid).

 

CAUTION: Oxalic acid is a toxic chemical (available in drugstores and hardware stores) and every precaution-including any written guidance furnished by the chemical manufacturer or supplier-should be followed to prevent its ingestion, inhalation, or contact with the skin in either the solid or solution form.

7.        Rinse with water and let dry. Reapply floor polish if normally used.

8.        Consult your builder

***CAUTION: These solvents are highly flammable, so exercise proper care in their use